| |
|
| |
| |
 班级规模及环境--热线:4008699035 手机:15921673576( 微信同号) |
| |
坚持小班授课，为保证培训效果，增加互动环节，每期人数限3到5人。 |
| |
上课时间和地点 |
| |
上课地点：【深圳分部】：电影大厦(地铁一号线大剧院站)/深圳大学成教院 【上海】：同济大学(沪西)/新城金郡商务楼(11号线白银路站) 【北京分部】：北京中山学院/福鑫大楼 【南京分部】：金港大厦(和燕路) 【武汉分部】：佳源大厦（高新二路） 【成都分部】：领馆区1号（中和大道） 【沈阳分部】：沈阳理工大学/六宅臻品 【郑州分部】：郑州大学/锦华大厦 【广州分部】：广粮大厦 【西安分部】：协同大厦 【石家庄分部】：河北科技大学/瑞景大厦
最近开课时间(周末班/连续班/晚班）：请点击此处咨询在线客服 |
| |
实验设备 |
| |
☆资深工程师授课
☆注重质量
☆边讲边练
☆合格学员免费推荐工作
★实验设备请点击这儿查看★ |
| |
质量保障 |
| |
1、培训过程中，如有部分内容理解不透或消化不好，可免费在以后培训班中重听；
2、课程完成后,授课老师留给学员手机和Email,保障培训效果,免费提供课后答疑。
3、培训合格学员可享受免费推荐就业机会。 |
| |
课程大纲 |
| |
|
| |
| 时间 |
课程大纲 |
| 第一部分 |
| |
1 高速PCB设计中的理论基础
传输线理论、信号完整性（反射、串扰、过冲、地弹、振铃等）、电磁兼容性和时序匹配等等。
2.SPECCTRAQuest设计流程
2.1 Pre-Placement
2.2 Board Setup Requirements for Extracting and Applying Topologies
2.3 Database Setup Advisor
—Cross-Section
—DC Nets
—DC Voltages
—Device Setup
—SI Models
—SI Audit
|
| |
3.拓扑结构的抽取与仿真 Extracting and Simulating Topologies
3.1 Pre-Route Extraction Setup—Default Model Selection.
3.2 Pre-Route Extraction Setup—Unrouted Interconnect
3.3 Pre-Route Template Extraction
3.4 SQ Signal Explorer Expert
3.5 Analysis Preferences
3.6 SigWave
3.7 Delay Measurements
|
| 第二部分 |
| |
4.确定和施加约束 Determining and Adding ConstraintsSolution
4.1 Solution SpaceAnalysis: Step 1 to 6
4.2 Parametric Sweeps.
4.3 Constraints:
Topology Template Constraints
Switch/Settle Constraints
Assigning the Prop Delay Constraints
Impedance Constraint
Relative Propagation Delay Constraint
Diff Pair Constraints
Max Parallel Constraint
Wiring Constraint
User-Defined Constraint
Signal Integrity Constraints
4.4 Usage of Constraints Defined in Topology Template
|
| |
5.模板应用和基于约束的布局
Template Applications and Constraint-Driven Placement
5.1 Creating a Topology
5.2 Wiring the Topology
5.3 TLines and Trace Models
5.4 Coupled Traces
5.5 RLGC Matrix of Coupled Trace Models
5.6 Crosstalk Simulation in SQ Signal Explorer Expert
5.7 Simulating with Coupled-Trace Models
5.8 Sweep Simulation Results with Coupled-Trace Models
5.9 Extracting a Topology Using the Constraint Manager
5.10 Electrical Constraint Set
5.11 Applying Electrical CSet
5.12 Worksheet Analysis
5.13 Spacing and Physical Rule Sets
5.14 Electrical Rule Set
|
| 第三部分 |
| |
6 基于约束的布线 Constraint-Driven Routing
6.1 Manual Routing
6.2 Routing with the SPECCTRA Smart Route
6.3 Driving Constraints in Routing
7 布线后的DRC检查和分析 Post-Route DRC and Analysis
7.1 Post-Route Analysis
7.2 SigNoise
7.3 Reflection Simulation
7.4 Reflection Waveform Analysis
7.5 Comprehensive Simulation
7.6 Crosstalk Simulation
7.7 Crosstalk Analysis
7.8 Simultaneous Switching Noise Simulation
7.9 SSN Waveform Analysis
7.10 System-Level Analysis
7.11 A Complete Design Link
7.12 Initialize Design Link
|
| |
8 差分信号设计 Differential Pair Design Exploration
8.1 Types of Differential Pairs in SPECCTRAQuest
8.2 Create Differential Pair Using SPECCTRAQuest
8.3 Create Differential Pair Using Constraint Manager
8.4 Assigning Differential Pair Signal Models
8.5 Preference to Extract Unrouted Differential Pair Topology
8.6 Extracting Unrouted Differential Pair Topology
8.7 Custom Stimulus to Analyze Differential Pair Topology
8.8 Differential Pair Topology Analysis
8.9 Coupled Trace Model and Differential Pair Topology
8.10 Layout Cross-section Editor
8.11 Differential Pair Constraints
8.12 Differential Pair Constraints in the Constraint Manager
8.13 Differential Pair Analysis in the Constraint Manager
8.14 Post Route Extraction
|
|
|
|
|
|
Troubleshooting Java Applications
Classpath Errors
Class Loaders
Common Java Errors
Troubleshooting Servers
Native Libraries
Threading Architecture
Work Managers
Deadlocks
Overload Protection
Deployment Problems
Troubleshooting JDBC
Data Source Management
Diagnostics
Debug Flags
Connectivity Problems
Connection Leaks
Database Availability
Troubleshooting JMS
Management
MBean Hierarchy
Message Logging
Diagnostics
Debug Flags
Overload Protection
Lost Messages
Duplicate Messages
Troubleshooting Security
SSL Internals
Keystore Management
Debug Flags
Common SSL Problems
Certificate Validation
Embedded LDAP
Security Audit
Common LDAP Problems
Troubleshooting Node Manager
Internals
Security
Common Issues
Troubleshooting Clusters
Plug-in Configuration
OHS Overview
Plug-in Connectivity
Plug-in Diagnostics
Unicast Communication
Replication Debug Flags
Typical Replication Issues
|
首页 课程表 在线聊 报名 讲师 品牌 QQ聊 活动 就业
